How to Put Arris Modem in Bridge Mode?
By default, the Arris modem functions as a gateway and it provides wireless internet to various devices. When the modem works in the Modem mode, it acts as a router and a modem both. But, you might need to disable the router function of the modem in certain condition. It is required especially when you want to connect a router to the Arris modem. This will be possible if you put Arris modem in Bridge mode and make the modem work as a modem only.
Note: When you disable the router functionality of the Arris modem, the devices connected to the modem will get the IP address directly from the ISP.
Steps to Put Arris Modem in Bridge Mode
The steps provided below will help you access the web GUI of the Arris modem and put it in the Bridge Mode. However, be sure that the internet is working fine.
- From a PC connected to the Arris network, launch an internet browser.
- Any web browser like Internet Explorer, Firefox, or Safari can be used.
- Into the address box of the browser, type 192.168.0.1 and press Enter.
- This will take you to the Arris router login page.
- There, type admin in the Username field.
- Enter password in the field labeled Password.
- Select Login.
- Now, you will get redirected to the System Basic Setup window.
- From the top menu, select LAN Setup.
- You will be taken to a page labeled LAN Settings.
- There, click the drop-down menu of the NAT Mode option and select Bridged.
- Select Apply after that.
- A new window will appear that will require you to restart the modem.
- Select OK.
- The NAT settings will be changed after that.
- Restart the modem.
- It has successfully entered the Bridge Mode.
This is how you can put Arris modem in Bridge mode. Now, the WiFi functionality of the modem is not working and you can hardwire your devices to its LAN ports. To ensure that the process is completed effortlessly, we recommend you update the internet browser and ensure that the IP address being used by you is correct. Know that the new IP must be used if it has been changed. Also, ensure that the LAN cables used by you are intact.
The Conclusion
We are now wrapping up the guide explaining how to put Arris modem in Bridge mode. Hopefully, the above given steps will help you complete the process without any problem. For your information, when the Bridge mode is enabled on your Arris modem, it will not route the traffic. But, it will still act as a firewall if you have enabled the firewall settings.
The Bridge mode setup is advantageous when you are adding a firewall, router, or other NAT device to improve the local network coverage. You must also set up the modem in this mode if you are using hosting services or applications that can benefit you when directly accessed on the internet.