Why Arris WiFi Not Working and How to Solve It?

There can be several reasons that can occur when you are settings up your Arris WiFi system or configuring it via Arris router login interface in home. Major of them are Arris WiFi not working and internet not working. Here, you will get to know about the reasons why these problems are troubling you and how to solve it with the help of simple solutions.

Reasons

• Arris router not connected to the internet.
• Connected Ethernet cable to router is damaged.
• Cable is not connected to the correct ports.
• Power cord is damaged, and electricity is not supplied enough.
• Router ports are damaged and the cable cannot be connected to them.

So, these were the reasons why your Arris WiFi not working, and further we will explain how to solve this problem with the help of some solutions.

Solutions

Check Connected Cables

Arris router connects with the help of the Ethernet cable which connects in the router WAN port and modem LAN port. You must make sure that the Ethernet cable is fine and working good, if not then replace it.

Reboot Once

By restarting the router, you will refresh all the settings and hardware parts easily. There are two methods to do that;

• Find the router power button and press it twice (first press will turn the router off and second press will turn it on).
• Unplug the router from the power wall socket and plug it again to turn it on again or restart it.

Reset Your WiFi

If restarting the router not working then you can reset the Arris WiFi with the help of the given instructions;

• Find the Reset button.
• Press and hold it about 10 seconds.
• It will be a pinhole so use a sharp object.

Now, reset process is done and all the settings will set default, so you have to configure the router again.

Configure Again and Update

• Connect computer to the Arris router network via LAN cable or SSID.
• Open web browser and search the IP address 192.168.0.1 (you can find in the user manual).
• You will get to the login page; here you have to enter the username and password (given on the router label or user manual).
• Now, you can access the interface via admin credentials and configure the router again.

To update the Arris router, you just have to access the interface>Open Settings>Select firmware>click on UPDATE button.

The end Conclusion

Here, you have seen and learned about how to solve the Arris WiFi not working issue with the help of simple solutions.