Arris Modem Not Turning On: Troubleshooting Guide
To access the internet on wireless client, it is important that an Arris modem works properly. But, things are quite annoying when the Arris modem not turning on issue shows up. You can determine the same by checking the Arris modem lights.
If you are also unable to make the most of the internet services you are getting due to the same problem, it is recommended to give a read to this post.
Why is Your Arris Modem Not Turning On?
There can be numerous reasons why an Arris modem does not turn on. We have listed some of them for you below:
- There is a power outage in your area.
- The power adapter or power cord of your Arris modem is damaged.
- The socket into which you have plugged your Arris modem is not working properly.
Solutions: Arris Modem No Power
Now that you are familiar with the reasons due to which an Arris modem denies turning on, you are suggested to give a read to the tips highlighted below in order to get the problem resolved.
1. Check If Power Outage is There
As mentioned before that the Arris modem no power issue can be due to no power in your locality. Thus, check whether your entire area is suffering from a power outage. If yes, then you are suggested to wait until the power cut is over.
You can also use a UPS to power up for your device. However, we do not recommend using a surge protector to turn on the Arris modem.
2. Verify the Power Cord and Adapter
Have a look at the power cord and adapter of your Arris modem. If any of them is found damaged, get it replaced immediately. But, make sure that you are using genuine accessories supplied by Arris.
Using duplicate or accessories from third-party can not only affect the performance of your Arris modem, but can also make it non-performing forever. Also, ensure that power adapter is properly connected to the wall socket.
3. Repair or Change the Wall Outlet
There are chances that there is nothing wrong with the modem, but, the problem is with the power outlet. Check that precisely. Is it damaged or short-circuited? If yes, then you are suggested to get it repaired with the help of an electrician.
You can also consider plugging your modem into another wall socket. Just make sure that the chosen one is perfectly working. Otherwise, the issue will keep troubling you.
Reboot the Modem
A temporary glitch can also halt the powering up of your Arris modem. Thus, to get the Arris modem no power issue, you are suggested to re-initiate the powering up process. Simply, pull the modem’s plug out of the wall socket and wait for some time. Lastly, connect the modem back to the wall outlet.
The Concluding Thought
The Arris modem not powering up issue can arise if there is a technical glitch, power issue from the backend, or in case the factors involved in the power supplying process are damaged. With the help of the information provided in the blog, you can easily rule out these possibilities.
On the off-chance, there is still no power on your Arris modem, you are advised to perform a factory default reset and set it up once again from scratch.