Arris TM1602 Not Working: Let’s Fix It

The Arris TM1602 modem router amplifies the speed and it also supports the Ethernet connection. In addition it also provides the independent telephone service lines with high speed data. It supports almost all Internet service providers; if your modem router Arris TM1602 is not working then let’s discuss the possible reasons behind the same.

Probable reasons of Arris TM1602 not working

• First and foremost reason could be defective electrical outlet which might be affecting the power supply to the modem.

• There are chances due to damaged power cable or loose connection at the power port.

• The excessive heated Modem and faulty power adapter. 

Solutions to Fix Issues

Now we have got some clarity about reasons which might be instigating the Arris TM1602 not working. Follow the hacks given below to resolve the issue in an effective manner.

Cross check power source

Make sure that the power socket is intact and there is no wear and tear issue with the power cable. Both should be in good running shape else this could hamper the connectivity. So, if it is damaged then so replace it and keep a check on and off.

Stable Connection

There are certain points should always be looked after well, first is power cable is properly plugged in. There should be no loose ends when cord is connected with power outlet and adapter. So, if the Arris TM1602 is getting the power supply uninterruptedly, it means connection is appropriate.

Modem moderate temperature

Nonstop working of any device can raise the temperature, so it is vital to give rest to devices as well. We can do so by following measures:

• Keep unplugging the modem cord on and off, this will provide room to cool down.

• Keep it unplugged for couple of minutes. This will also help in rectifying the temporary glitches in the system.

• When you plug in the modem again in the electrical socket, power LED will turn on this confirms the fine connectivity.

Check Power button

Usually we don’t notice but it is quite possible that we might have not noticed but the power button on the Arris modem is in Off mode. So, make sure to switch it On and is in perfectly working stage. If there is some fault with the physical form then do get it fixed.

Reset

Use the Reset button provided on the back of the Arris modem router, press and hold it for few seconds and then release it. This process will remove the glitches and provide an option to customise the settings for Arris Login.

Adequate Internet supply

Uninterrupted internet supply to the modem is required. To avoid the loss during the power outages try to use a UPS for additional support.

Power Adapter working properly

For stable working of the modem it is a prerequisite that the power adapter should be in appropriate condition. So keep an eye on the sources supplying power to the modem should be running fine.

Conclusion

This was all about the possible reasons for Arris TM1602 not working and the respective solutions to fix the issue. You can try and if still unable to resolve it then you can speak to the support team.