The Arris Surfboard SBG10 Setup: A Complete Tutorial

The Arris Surfboard SBG10 is a next generation WiFi device that works both as modem as well as router. It is also known as cable modem. You can directly connect the computer to the cable modem, and take advantage of ultra fast internet speed.

But before using this ultimate device, you need to perform the Arris surfboard sbg10 setup process. In today’s blog, we provide step by step instruction to setup and Arris router login to cable modem.

Steps to Setup and Login to Arris Surfboard SBG10

Step1: First of all Unboxing the Arris device, it box include an Arrise Cable Modem, quick start manual, power adapter and Warranty Card. Check all the item are available in the box.

The following items are not included in the box and but you must be purchased separately, if required

• Coaxial cable – if one is not already connected to a cable wall outlet
• RF Splitter- for additional coaxial cable connections, such as a set-top box or Smart
• Ethernet cable – For each additional Ethernet-enabled device.

Step2: Choose the centered location at the home for the cable modem. And connect the coaxial cable to the rear of the Arris Modem. Also attach the power adapter to the modem and plug it to the wall socket. Give power to modem to complete the Arris surfboard sbg10 setup.

Step3: Now make a connection between modem and the computer device with Ethernet cable. If you are establish a wireless connection, and then you need to enter default Arris router login detail to connect.

Step4: Go to the web browser on your computer; enter the www.surfboard.com or Default IP address 192.168.0.1 into the address bar. Here a login page will be open, fill the default login detail and hit on the Login button. Now you will enter into the web interface of the modem.

Step5: After access the interface, it times to configure the modem and complete the Arris surfboard sbg10 setup process. To configure, click on the Menu Bar and select the 2.4 GHz and 5GHz, and select and deselect the Enable Wireless to turn On or Off the wifi networking in your house.

Step6: Find there is a option to Set the Network Name, by using this option create the new SSID and password. Use this SSID and password to connect the devices to the Arris Modem. Now your Arris surfboard sbg10 setup is complete. You can also change different settings using this Web interface.

Conclusion

This blog teach you steps by steps instruction, by follow these instructions you can complete the Arris surfboard SBG10 setup process at home.